Are you running fenders and what size wheels are you using. I am looking at the same setup but I think 285 are to tall for fenders. Any comments would be appreciated.
Visit our community sponsor
Are you running fenders and what size wheels are you using. I am looking at the same setup but I think 285 are to tall for fenders. Any comments would be appreciated.
Jonathan, I am not, but here is a site with a height calculator...
http://www.wallaceracing.com/tire-aspect-calc.php
FFR HR #530
Race car theme, Tim Whitaker roll bar, Autometer Autolite Gauges, Satin Black, SBC 383/700R4, 8.8 rear with Cobra Brakes, 3.29 gear, Boyd Tank, QA1 springs and shocks,
My build blog: http://jacks33hotrod.blogspot.com/
The 285/35/18 should be approx 25.9 inches high. I am using 295/30/18, which are 25 inches and there is plenty of room in the fender for more height. I did put 1" spacers behind the wheels to move the tires away from the body and closer to the outer edge of the fender. It depends which axle you have. Check my build thread for pics.
www.33coyote.com
Built with the help of my dad and sons
coyote/TKO 600, Wilwood Brakes,Boyds tank, QA1 shocks
Speedhut Gages, rag top, bike fenders, power steering
"Never let physics or common sense get in the way of a good idea"