Did anyone receive a set of high beam connectors in their package, I see the low beam but not high beam
Visit our community sponsor
Did anyone receive a set of high beam connectors in their package, I see the low beam but not high beam
Tony Nadalin
2018 SOVREN Big Bore Champion
2015 SCCA Oregon Region VP3 Champion
2012 ICSCC ITE Class Champion
FFR MkII Challenge Car, Spec Racer, Street Legal, SCCA, ICSCC and NASA Racing
818R Build in progress
I had to buy them.
Mike
The high beam come from your donor, if you used a 2002-2003 donor, you have to buy them.
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
Frank
818 chassis #181 powered by a '93 VW VR6 Turbo GT3582R
Go-karted Aug 5, 2016 - Then May 19+21, 2017
Tracked May 27/July 26, 2017
Build time before being driveable on Sep 27, 2019: over 6000h
Build Completed Winter 2021
Did anyone have an issue with their high beam bulb fitting poorly? I can insert it and twist and it will not pull out directly but it is loose and does not fit in like the low beams did, tight. I know there is an o-ring on the bulb, but is there a larger o-ring that is in the light housing or something that I might be missing?
If someone could look at the Headlight where the bulb goes in, is there an o-ring, mine looks like there should be one that sits in the chromed plastic.LBHeadLight.JPG
I finally got back in town, and tightened the screws on the lock ring and it holds much better.