Boig Motorsports

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 9 of 9

Thread: Under car exhaust

  1. #1
    Junior Member
    Join Date
    May 2016
    Posts
    8
    Post Thanks / Like

    Under car exhaust

    Is there enough clearance for a full under-car exhaust? Seems like a good way to prevent toasted ankles.

  2. #2
    Senior Member Todd Buttrick's Avatar
    Join Date
    May 2011
    Posts
    135
    Post Thanks / Like
    Give this search a try. Tons of great info.

  3. #3

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,709
    Post Thanks / Like
    Blog Entries
    1
    Several fellows have done very nice under car exhaust systems and have done so using Spintech Low Profile mufflers:

    https://spintechmufflers.com/muffler...file-mufflers/

  4. #4
    Senior Member
    Join Date
    Mar 2017
    Location
    Spicewood, Texas
    Posts
    106
    Post Thanks / Like
    I did mine with spintech mufflers and oval pipe. With the new IRS it is nearly impossible to exit in the rear. Mine just exit in front of the rear tires.
    LS1, TKO600, IRS, no scoop, undercar exhaust. Delivered June 14, 2017, First start December 31, 2017, Registered and Titled Sept 12, 2019.

  5. #5
    Senior Member Duke's Avatar
    Join Date
    Dec 2015
    Location
    Taxachusetts
    Posts
    404
    Post Thanks / Like
    Yup, there's room.

    Attached Images Attached Images

  6. #6
    Senior Member John4337's Avatar
    Join Date
    Feb 2011
    Location
    Copperhill, TN
    Posts
    452
    Post Thanks / Like
    I did mine with spin tech 7000 series mufflers and 2 1/4 inch pipe, went all the way out the back. Worked great

    John
    FFR #7388 - Mk 4 Complete Kit w/ IRS, Ordered 10/21/10, Delivered 12/8/10. 302 with FiTech and Under Car Exhaust, Heat & A/C, Rod Top. Hard top and shop built side curtains added 2023.

  7. #7

    Steve >> aka: GoDadGo
    GoDadGo's Avatar
    Join Date
    Feb 2015
    Location
    Slidell, Louisiana
    Posts
    6,709
    Post Thanks / Like
    Blog Entries
    1
    Isn't I Great When A Plan Comes Together?

    A Plan = Factory Five Forum Members

  8. #8
    Moderator
    Join Date
    Apr 2017
    Location
    Sacramento CA
    Posts
    452
    Post Thanks / Like
    Maybe overkill or impossible, but could you run two smaller pipes down each side and a collector at the muffler? Maybe it would not help at all but it would seem to give more room underneath.
    Mk3.1 347 AFR 205cc Heads A9L EFI siemens deca 60lb injectors MSD 6AL ignition Vortech V-3 3 Link PS/PB

    -- If you can’t fix it with a hammer, you have an electrical problem ! —

  9. #9
    Senior Member John4337's Avatar
    Join Date
    Feb 2011
    Location
    Copperhill, TN
    Posts
    452
    Post Thanks / Like
    I think overkill, I’m using 2 1/4 round, and haven’t had any problems. It hangs just below the floorboards, maybe 3/16 clearance.
    FFR #7388 - Mk 4 Complete Kit w/ IRS, Ordered 10/21/10, Delivered 12/8/10. 302 with FiTech and Under Car Exhaust, Heat & A/C, Rod Top. Hard top and shop built side curtains added 2023.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Breeze

Visit our community sponsor