This edge that they left at the top inner edge of the door I assume you grind down to make the top of the door flat. Am I correct in saying that?
IMG_20230620_203326.jpg
Then round it off and add filler as needed.
Visit our community sponsor
This edge that they left at the top inner edge of the door I assume you grind down to make the top of the door flat. Am I correct in saying that?
IMG_20230620_203326.jpg
Then round it off and add filler as needed.
33 Hot Rod Stage 1, Gen.2 ordered 11/11/2021 started June 12, 2022, LS3 E-Rod crate engine, Tremec TKX, 8.8 WITH 3.55 Ratio and limited slip with 31 spline axles.17X8 and18x10 Race Star wheels wrapped in Conti Extreme contact DWS tires, Mustang Cobra brakes all around. Electric PS and AC. Hard top, electric windows and bike fenders. First Start 5/31/2023. Go-Kart 6/2/2023.
FFR like any other business must keep on rotating / replacing employees in the fiberglass portion of their business. The inconsistency of panels out of the factory is somewhat surprising. My Gen2 kit I got in Sept of 2020 had that edge removed. Odd some do and some don't.
Jim
33 Hot Rod w/ 302 & Tremec T5; paint color is 68 Ford Mustang GT LimeGold
https://thefactoryfiveforum.com/show...s-Build-Thread