I found a rear end I would like to use in my Hot rod Truck kit, it's for 03-04 Cobra - anyone know of that will work?
Appreciate any help or info, thanks
Visit our community sponsor
I found a rear end I would like to use in my Hot rod Truck kit, it's for 03-04 Cobra - anyone know of that will work?
Appreciate any help or info, thanks
Not the same.
99/2000 NASA PSO Champion-2005 west coast FFR challenge series Champions
Sponsor Tony B's 2007 ST2 National Championship
2009 NASA TTC runner up-2010 NASA TTB runner up
The S197 diff is wider and has a single upper link bushing.
Last edited by Gordon Levy; 04-18-2024 at 04:30 PM.
99/2000 NASA PSO Champion-2005 west coast FFR challenge series Champions
Sponsor Tony B's 2007 ST2 National Championship
2009 NASA TTC runner up-2010 NASA TTB runner up
I used a 2004 Mach 1 as a donor for my MK4 in 2011. The Mach 1 used a live axle as shown. I had to narrow mine so that I could use 315s out back. It is a good rear axle to use if you are going 3-link and willing to narrow it. It also has the ABS tone rings if ABS is of interest to you.
The Cobra has a IRS rear suspension as I recall, so that is not from the Cobra but more likely from the Mach 1 or possibly from the GT.
MK4 base kit, 2004 Mach 1 donor, 4.6L DOHC, TR-3650 5-speed, narrowed stock axle with 3.55 gears and TruTrac, PS, PB, ABS, 17" Halibrand replica wheels, started 12/2011, registered 9/2014, sold 3/1/2018.
1970 Mustang Fastback Coyote powered Boss 302 tribute. Started 10/14/16.
Gen 3 Coupe Base Kit non-donor build. Ordered 4/5/2024 to be received August 2024.