Very Cool Parts

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: clutch problem.

  1. #1
    Junior Member
    Join Date
    Apr 2022
    Posts
    16
    Post Thanks / Like

    clutch problem.

    Ready for first go cart drive of my type 65 coupe but need some help with a clutch problem. Have a new coyote and 6 spd. tremac. Wildwood hydraulic clutch. Everything is new. I believe I have the clutch adjusted correctly about 1/8 in free play before the throw out bearing contacts. Here is the problem, On blocks with engine running I can step on the clutch and engage 1st gear or reverse or go through the gears. Wheels are still before I engage then spin normally. On the ground engine running stepping on the clutch I cannot engage 1st gear. Trying to engage the car ties to move forward. I believe I may need a larger clutch master and slave cylinders. I have a 3/4 in master and the slave moves about 1 in fully depressed. Any thoughts or advice would help. Thanks in advance.

  2. #2
    On a roll Al_C's Avatar
    Join Date
    Aug 2014
    Location
    Wheaton, IL
    Posts
    1,471
    Post Thanks / Like
    Just my opinion: I don't think you need a new master and/or slave cylinder. If you can adjust it, I think you should do that. I believe that you can't get it into gear on the ground because the clutch is not completely disengaged. You need to build a bit more slack into it. When the car is on blocks, you have more play between the all the moving parts (including the wheels). When the wheels are on the ground, you don't have that play. I'd try adjusting things first.
    Mk IV Roadster - #8650 - delivered 7-17-2015 - first start 7-28-2018 - first go-kart 10-13-2018 - licensed and on the road 9-9-19: body/paint completed 3-17-2020.
    Complete kit / 2015 Coyote / TKO600 / IRS / Wilwood brakes / Mid-Shift mod / Power Steering / Heater and Seat Heaters / RT turn signal / Breeze radiator shroud and mount

  3. #3

    Join Date
    Feb 2011
    Location
    Norton, MA USA earth
    Posts
    3,480
    Post Thanks / Like
    You need less play not more. try adjusting the pedal towards the driver seat to give you some more throw.
    Mike

  4. #4
    Junior Member
    Join Date
    Apr 2022
    Posts
    16
    Post Thanks / Like
    Quote Originally Posted by Al_C View Post
    Just my opinion: I don't think you need a new master and/or slave cylinder. If you can adjust it, I think you should do that. I believe that you can't get it into gear on the ground because the clutch is not completely disengaged. You need to build a bit more slack into it. When the car is on blocks, you have more play between the all the moving parts (including the wheels). When the wheels are on the ground, you don't have that play. I'd try adjusting things first.
    Thanks Al will try more adjusting before I change anything.

  5. #5
    Junior Member
    Join Date
    Apr 2022
    Posts
    16
    Post Thanks / Like
    Quote Originally Posted by michael everson View Post
    You need less play not more. try adjusting the pedal towards the driver seat to give you some more throw.
    Mike
    Thanks Mike I will try adjusting the pedal as well before I change anything.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Julio Car Custom

Visit our community sponsor