i have the complete kit and going over some of my suspension parts i noticed that the top of the ball-joint is up and not seated into the balljoint mount, the balljoint mount is orientated as the pic shows on page 42 of the mk3 manual, i installed this about 2 years ago and now i am wondering, is the mount reversable, could it be upside down or does it matter?
the otherside it sets onto the mount flush with the square top nut of the balljoint.
what i remember it screws into the mount right?
the square nut top of the balljoint is above the mount for the balljoint about 3/16 of a inch.
going over all my odds and ends to prepare for go-cart.

let me know
Leo