This thread is about accelerator pedal mounting - but first some background info.

I made the decision to go with a Wilwood pedal box assembly rather than the stock one. (by the way, as a result, I have a like-new stock pedal box and MCs if anyone needs it). As has been discussed at length elsewhere, FFR began welding in mounting tabs that allow the mounting of adapter plates allowing either stock or Wilwood pedal boxes to be used (Different mounting plates for each of those choices).

Since my chassis is #114 and precedes this feature, I got the weld-in tabs and mounting plate, etc. for a Wilwood 'box from FFR. I'll have to remove the powder coating and the stock pedal box mounting plates to weld-in the new tabs.

Because I am doing the above, It makes sense to fabricate an accelerator pedal mount which is adjustable to accommodate, among other things, heel-and-toe. Has anyone done this or is anyone thinking about doing this? If not, I will launch into fabricating a mount for the pedal which has some mechanism for adjustability.

I would post pics, but must admit that I don't know how. Can someone direct me to step-by-step directions for doing so, please?

Thanks