Ok, sorry for the glamorized title

This is what is posted by FFR in their main website and I'm sure it's still preliminary and subject to change.



What I see is:

OEM Subaru front knuckles/hubs with fabricated A-arm adapters in the 'stock' location up front.
OEM Subaru front lower control arm w/OEM bushings in the stock location up front.
OEM steering rack and steering column.
FFR sourced/fabricated uppercontrol arms in the front.
OEM rear trailing link, in the rear.
OEM rear lateral link/s, in the rear. These suggest OEM rear knuckles/hubs.
OEM sized wheels, but with non-OEM staggered tire sizes
NOT OEM coilover shocks at all 4 corners.

As it looks in the pic, I see no center tunnel structure. I would normally be concerned about torsional rigidity as it sits without a tunnel, but I know that Jim is a much better engineer than I.