I'm thrilled that my air conditioning works! Since I've never worked on air conditioning before, and think it works by voodoo magic, I'm amazed that it blows cold! The only problem is that the radiator fans must turn on when the A/C is on. The guy at the A/C shop says that if there is not enough air through the condenser the system will develop too much pressure and shut down. I dieted the '06 WRX wiring and now the ECU turns the fans on when the engine is warm enough. I have to find a way to connect the A/C system somehow so the fans turn on when I switch on the A/C. The ECU is wired to a relay, then to the fans, right? Is there a way to connect my Vintage Air wiring through the relay without causing a problem when the ECU turns on the fans?