I think I got more done yesterday than the entire summer. Hooked up ignition for the coyote controls pack (blue to start position of switch, pulled the RF blues off as they won’t be used, green with the RF orange on ignition switch, red to the two reds with RF on switch, ground to ground). Hooked up the fuel pump relay out from the controls pack to the fuel pump. But I have to redo that. I want it to go through the inertia switch and kick the relay in the RF instead. I’ll do that next week. Hooked up fan and ran main power to the controls pack black box. I put the fuse for it near the battery. All in all, I think the wiring is done (save for the fuel pump change).

Pic or two but I’ll put more up next update. Not much to see other than more and more wires.

My crimp and heat shrink job