First of all,
Thanks to everyone, especially Edwardb for your advise. I feel like I’m hogging this message board as of lately.

I am thinking about putting the controll pack fuse box on the drivers side firewall. The location the directions give has already been used up by my heater. So I would have to put it a little further away on the passenger foot box and then the wires will have to go through the firewall at a location that will make it tough to get it all the way to the accelerator pedal connector.

Is there any good reason not to put it on the drivers side firewall? The biggest one I can think of is that if the motor has to come out I will have to remove it.

Thanks in advance