I have searched through this site, the manual and wire booklet provided with the kit and I am confused bc they all say something different. So I decided to post pictures of what I have and see what other builders say. The issue right now is when I turn the ignition key to power my rear brake lights are on ( this is with the purple wire on the brake switch connected on one of the post and I did cut the purple wire off the rear brakes lights at the rear of the car.) If I take remove the purple wire from the switch post the brakes go out. But if I follow the wire diagram correctly then there is not supply of power to the column wiring as I believe it receives power from the orange wire off the fuses panel through the brake switch. I have heard some say to cut the purple wire at the brake switch and tape it back. Others say they have it connected. Any help would be appreciated. I have attached photos showing my setup.