Looking for some insight into my shifter location. This is a Gen 3 Coupe with a 347 and TKO trans. Finally got it in the chassis last night to verify clearance for accessories/routing. The shifter boot is pretty hard against the diagonal tube and I can't quite line up the trans isolator with the trans crossmember slots. I have the crossmember installed as per the manual (flange towards the rear, pointing down and sitting on top of the frame brackets). It almost looks like the crossmember should be mounted to the bottom of the frame brackets. I know most folks are running the coyote but if anyone has any insight it would be greatly appreciated.



Eng Install_2.jpgEng Install_1.jpgTKO Shifter.jpg

Manual.JPG