![Forte's](https://www.factoryfive.com/wp-content/uploads/2015/04/fortes.gif)
Visit our community sponsor
![Thanks](https://thefactoryfiveforum.com/dbtech/thanks/images/thanks.png)
Thanks:
0
![Likes](https://thefactoryfiveforum.com/dbtech/thanks/images/likes.png)
Likes:
0
-
Tail light wiring
Just finished wiring the tail lights per pages 454 & 459 of printed assembly manual. You end up with three wires coming out of the tail light units: White - ground; green - turn/brake; black - parking.
The supplied wiring harness has four wires (left side as an example): yellow - left rear turn; purple - brake; tan - left tail light; black - ground.
Question, with 4 wires going into 3 wires, do you tie the yellow and purple together and connect to the tail light unit green wire?
That leaves white to black as ground, and black to tan as tail light.
I am old and wiring challenged, so please don't be too harsh.
Also, I notice the FFR blue truck and the brown truck have the tail lights mounted in different locations. Any comments?
Thanks, Ralph
Woops, this should not be in the Build thread section. Admin. please move to questions area.
Last edited by rponfick; 04-28-2019 at 03:41 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Stewart Transport](https://thefactoryfiveforum.com/attachment.php?attachmentid=40533&d=1428868052)
Visit our community sponsor