My Sniper system has been replaced because I was having issues getting it stable. One lingering issue is that the snipers pink wire needs to be connected to a +12vdc wire that remains hot while cranking. They call this switched ignition. I have used the tan electric choke lead from the standard Ron Francis harness. The choke line stays hot while cranking perfectly. However, the handheld device reboots itself frequently while cranking the motor. This prevents me from getting an accurate log showing the entire startup. Anyone have any idea why this is happening? I have rechecked the wiring and it is intact. Test lite shows that the wire stays hot while cranking but the handheld reboots. Help please.