Visit our community sponsor
Thanks:
0
Likes:
2
-
Carbon Fiber Dash cutout
Working on the CF dash. In following the directions on the FFR site under Carbon Fiber Dash, the template for the dash I received is opposite from the printed directions. Their picture and printed directions match, however the template I received is different. When I look at the template, the marking for the steering is shown as: MK1/2 to the left, and MK3/4 to the right. The printed directions show MK 3/4 left and MK 1/2 to the right. If I follow the template and positioning if the large gauge to the left of the steering, it leaves +/- 3/4" between the steering cutout and the gauge. I note larger gaps in pictures of the Carbon Fiber dash that I have seen on the internet.Printed Dash Instructions.jpgDash Template.jpg
Last edited by Joynt Venture; 12-05-2020 at 09:35 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor