Visit our community sponsor
Thanks:
0
Likes:
0
-
Can someone ID this connector (or a suitable alternative)
I need to extend the harness that goes from the billet button on my E-Stopp parking brake (button is on the far left of the dash and control box is behind the glove box.). I've e-mailed E-Stopp and they don't sell an extension harness for the button. Does anyone recognize this connector, and possibly have any ideas where to get matching male/female parts and some pins? Alternatively, does anyone have a recommendation for a suitable alternative that's compact in size? it's just signal wires, so it doesn't need to carry any significant current. I checked my go-to Del City and they don't have any connectors that small. The only connector kit I have is Weatherpak and that would be massive overkill for this. I could butt-splice and heat-shrink the extra wire in, but they're pretty small wires so I'd prefer some sort of crimp-on solution designed for network/signal wires (my soldering skills are, well... I don't have soldering skills.)
MkIV Roadster build: Gen 2 Coyote, IRS, TKO600. Ordered 10/24/18. Delivered 1/29/19. Engine installed 8/8/21. First start 9/12/21. First go-kart 9/17/21. Off to paint 4/11/22. Back from paint 12/30/22.
Build thread here.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor