I haven't messed with the drivers door in some time due to frustration. I originally aligned the belt lines on the outside but the door seems to be twisted and the inner panel is not aligned with the outer panel. the inner belt line is off by ~3/8 inch. I have shimed the front of the door almost 3/8 inch to remove the twist and it still needs another 1/4 inch. It will take a ton of grinding and glass work to get this door looking half way decent. My question is: Has everyone had the same problem or is this a bad door?IMG_1159.jpgIMG_1160.JPGIMG_1161.jpgIMG_1162.jpgIMG_1163.JPG