Need body fitment help! The front wheel well is too close to the front of the tire such that the tires rub against the body of the wheel well with even a small turn. The rear wheels sit correctly, and the body is secured with quickjack bolts. Front alignment was done with fasttrax and set to the manual specs. I understand this will improve after the body trim, but seems at this stage of my build, I should at least be able to drive it around the parking lot. Any suggestions? It is most pronounced on the driver's side and those pictures are attached.
Specs
Caster +7 (pwr steering), Camber -0.5, Toe 1/16"
Ride height 5.75" front, 6.5" rear; not final but enough to maneuver a lift around the car