Wilwood Dual Reservoir Bracket and Location

[Lee Baldwin]

I ordered the Wilwood pedals and dual reservoir system from FFR. I am building an 818C and will be using the FFR wiper kit.. The instructions that I found on the FFR website are for an earlier Wilwood kit and the bracket to mount the reservoir in the FFR instructions does not match what I received. The bracket that I think is correct has some holes that match the reservoir mounts but I am not sure that I have the correct bracket and where to mount the reservoirs. I might be over thinking but I am not sure what clearance I will have in the finished car over the cross member that the bracket (piece of aluminum) is mounted to. I spent about an hour or so looking for pictures and noticed a lot of different places folks have mounted the reservoirs.

Is this a good place to mount them?
IMG_1305.jpegIMG_1307.jpeg

How high can the reservoir stick above the cross member that it is mounted to? (assuming the place I mentioned earlier is the right place to mount).

Thank you