Visit our community sponsor
Thanks:
1
Likes:
1
-
What's up with my (power) steering alignment?
I've clearly screwed something up.
The manual says "center-to-center distance for the top of the outer Tie Rod End stud should be 53 1/16."
I'm at 52" c/c. My tie rods are bottomed out. It looks like I need another full inch of toe in. I can only get that by timing the steering shafts, but I don't see that in the manual.
It also looks like I have too much positive camber, and I'm just about bottomed out on the upper arm too.
Where did I go wrong?
Screenshot 2024-03-17 at 3.39.41 PM.png
IMG_2292.jpg
IMG_2290.jpg
IMG_2293.jpg
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor