After 4 years of not making any progress on the car I am back at it. When I left off in March 2020 I had collected everything I thought I was going to need to plumb in the fuel system. Currently I have the following:

  • Mk4 Roadster with the 427 Blueprint engine and TKO600 transmission and IRS setup
  • Breeze fuel pickup (I can't find it on their site at the moment and I don't have the part number with me)
  • Holley 162-553 100 micron fuel filter
  • Holley 12-802-1 Blue electric fuel pump (which came with the Blueprint engine)
  • Holley 162-563 40 micron fuel filter
  • Holley 12-803BP Bypass regulator
  • Breeze 70750 06AN High Flow Fuel Return Kit
  • Breeze 70648 Big Bore Vent Check Valve Kit


My plan was to run -6AN stainless steel braided PTFE hose from rear to front. I am trying to figure out the best place to mount this fuel pump. On the FB groups, I have seen folks mount it to the rear of the 4" round frame rail. From looking at it, it seems like there will be interference with the IRS in that location. I am looking for ideas and pictures where people with similar setups are mounting the pump and friends.