Hey Everyone.

So i 2K Primed my Daytona with 3 coats and began block sanding with 220 grit. Finished that. Overall i am pleased. But i have area's that has gone through the body.

So my options are:

1) So should i respray another coat and then do 320 grit.

2) Touch up all of the area's with a spray can 2K Primer and Sand 320 Grit and then do it again with 600 grit

3) Just carry on with 320 grit, 600 grit then primer seal the whole car.

Last picture below shows an example of areas.

Thankyou!!!

.2K Primer 3.jpg2K Primer 4.jpg2K Primer 2.jpg2K Primer.jpg220 grit Sanding.jpg