Visit our community sponsor
Thanks:
6
Likes:
4
-
Senior Member
6/10
4 hrs - Passenger footbox (initial assembly and fitment)
Started fitting the panels, building and holding it all in place with clecos using only the factory pre-drilled holes to make sure all panels are positioned correctly before drilling additional holes for rivets. The manual is actually pretty clear on how to do this, just make sure you have all the panels in their correct place with good fitment at the seams and frame members before drilling your final holes. You'll be glad you marked the panels showing which tabs go where. Temporarily mounted f-panels.
IMG_3065.jpg
Last edited by JMD; 06-29-2024 at 08:21 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor