DIY carbon fiber dash

[bartock]

I have some experience with fiberglass and decided to cover the transmission tunnel cover and dash with epoxy and carbon fiber. After just one coat its looking pretty good, but going to smooth down a few spots and give it a satin finish. I still need to do the edges of the tunnel cover as the carbon fiber I got was only 12in wide. I may do the sides in leather or get a wider roll and add another layer that will cover the sides completely. For the shifter hole I used 5 min epoxy to glue the cover plate to the back side, then used filler to flush out the top so it wouldnt stick up and so there wouldnt be any rivets.
tumblr_9afe53125464c0e77d5a4605dd728edc_c0eba985_2048.jpg
tumblr_21c9cb99bc31dccd00cfff0ce8f38489_c489818b_2048.jpg
tumblr_246bc7830b41c5814c381eac3009e87c_c89ee4e1_2048.jpg
tumblr_3a24134702503a0d98af88225622932b_00c57079_2048.jpg