Stealing yet another one of AARon's great ideas!

[Rebostar]

After useing AARons great footbox cooling idea I swiped another one of his mods! So let me give kudo's to AARon for his You Tube vids on his build. He explained how he made is own scoop and how he installed it. I did not want the FFR screwed/rivited on plastic scoop. I liked the MK2 & 3 scoops built into the hood. So I bought a fiberglass scoop from Tony Branda. Its a very close match and I can fiberglass it in, which you can not do with the plasic one. Seeing AARon's install I was sold.

DSC03413.JPGDSC03414.JPGDSC03415.JPGDSC03416.JPGDSC03417.JPGDSC03418.JPG

The first was to lay out on the hood where the air cleaner is in relation to the hood, top and bottom. Then after finding and marking the centerline, I laid out the placement for the scoop. Then it was just cut out the inner line then use a router to remove the top section. After sanding everything smooth I used the NAPA fiberglass short strand filler to seal the upper and lower skins togeather. This will dry overnight. Then I'll bond the scoop on using the same fibergalss filler and screw it down while it dries overnight. After that I'll fair everything in with the Rage Gold.

DSC03419.JPGDSC03420.JPGDSC03421.JPGDSC03422.JPG