I plan to attempt to align the chassis my self. Ride height is set at 4” in the front and 4 1/2” in the rear. My thrust angle I believe is OK. I have set a temporary camber on the rear wheels using an aluminum bar cut to fit the outside of my 17” wheels and a good digital angle gauge. I have ordered a good set of toe plates. I don’t have a lift and I am too big to get under the car at a 4 1/2” ride height to reach the toe arm turn buckle to make any adjustments. Are you guys without a lift putting the chassis on jack stands making an adjustment and the putting the chassis back on the ground (rinse & repeat)? Is there an easier way I am missing? Also do sway bars need to be removed front and rear?
Thanks Ross