Rear brake line routing options

[narly1]

Looking for some suggestions as to a cleaner rear brake line routing scheme than what is shown in the assembly manual, and that will also not cause me grief later on in the build.

The run to the back along the side of the frame is a no brainer. The manual says to go vertical at the junction shown in this photo but I'm wondering why I couldn't/shouldn't just run the line on the brace that runs up on a 45. As the hose tab mounts on it anyways....

20241006_093446[1].jpg

Then for the run from there across to the passenger side put the line on top of this cross piece.

20241006_093458[1].jpg

Earl