Hey Y'all!
My car is almost done and I'm getting ready for the Texas custom vehicle inspection. I'm about 30 miles from the inspection station. So far my ability to secure a suitable car hauling trailer has failed. So my options are:
1. rent a u-haul open trailer, which would require a lot of wood planks to load and unload to get proper angles without scraping anything. Difficult to fully secure safety chain and not sure if it will really fit (e.g. can Daytona door even open above the trailer wheels/etc?)
2. drive an unlicensed/unregistered car to the inspection station and 'chance it' with any LEO's. (could put an old TX plate on it, or fake a temporary tag so it's not so obvious, then drive it like a Grandpa on the way down.)

A few other considerations: Austin, TX police are overburdened and possibly unlikely to enforce unlicensed vehicle issue. I will have full collision insurance on the car prior. Inspections agent hadn't had this question before and thought to just drive it, and explain to LEO that I'm on my way to inspection if pulled over. Trip is from Georgetown, TX to central Austin, TX - basically a 30 mile one way drive from suburb to central.

Any other ideas or thoughts? Would like to hear pros and cons of each. Appreciate any thoughts on this!