Hi everyone,

We're putting together an order list for items we need to install our engine and I'm looking for advice on a clutch because it seems there are about 100 choices. The FF shopping list that comes in the manual, which is pretty specific about most other items, just tells me that indeed I need a clutch but it provides really no detail other than that, so apparently we're on our own to select.

We're doing gen 3 Coyote, probably some medium-weight (~22 lbs) flywheel with hydraulic clutch with slave cylinder, TKX transmission (probably TCET17765 from table below), and 3.55 rear differential.

This car will see little if any track, rather this is all about fun street driving. I'd like for it to feel sporty and tight-ish, but not break your leg, race car tight.

I've read in other posts that single disk, "nothing fancy" is adequate for these low-weight cars being driven for fun, and that I need to make sure that whichever we choose can handle the torque output from the engine. I also see that Forte uses an 11" RAM with his Coyote packages. When I get on Summit to peruse with those parameters, it narrows my choice down to still about 50 different options. Looking for advice from the experts (and from those who may not yet be experts but are 1-2 steps ahead of me and so have already thought through this

tkx.png

Thanks!
ST