Ok so this is stumping me.

For a while now my turn signals have been flashing, then going solid for 2-30 seconds then flashing again. Everything seems random. It may not show up for a week, then hardly work.

If they are solid, not flashing, and you pull over the front and rear lights are also solid. The outside lights always mirror what the dash light does. So it’s not a bad light. Happens on both sides. Not related to the lights being on.

I’ve completely bypassed the column wiring and are using a new switch to try and narrow it down. No change.

I’ve swapped the flasher relay with the hazard light relay (relay the right word?) and no change.

So.. what? What random wire loose would
affect both sides?