Hi Guys,

Looking at my chassis harness with the wire bundle that goes to the starter motor on my Gen 3 Coyote. It has three red wires and one blue. My understanding is that I cut back the blue as I do not need it.

The trouble is that the three red wires do not reach to the starter motor (or possibly I could strip back the casing and they might just reach, but I don't like how they stretch over the transmission)

Reading through the forums and build threads, it seems that I could attach the three red chassis harness wires to the one side of the main fuse ("A" in the photo below.)
My understanding is that the red 12V wire runs from that same side of that fuse to the power bolt on the starter ("#2" in the photo below.)

Is this correct?

Does anything attach to the #1 or #3 bolt on the starter?

Thank you!

Chris in Canada
Gen 3 Coupe
Gen 3 Coyote

Starter.jpgScreenshot 2024-12-15 at 5.20.03 PM.png