Visit our community sponsor
Thanks:
0
Likes:
0
-
PLATNUM Supporting Member
Free 33 fuel tank and accesories.
Free FFR 33 tank, sender, fittings, gauge and Misc tank parts. You pay shipping. PM me if interested. I went with boyd tank.
-
Senior Member
Any chance your pickup assembly is slightly shorter than the on I received? A 1/8 of an inch would go a long way.
-
PLATNUM Supporting Member
Show me a picture and let me know what to measure for you and I will get back to you.
-
Senior Member
Originally Posted by
wallace18
Show me a picture and let me know what to measure for you and I will get back to you.
Figured it out, tab was bent. I am concerned if this engine will have enough fuel with the 5/16 feed line.
-
Senior Member
Originally Posted by
Boz1911
Figured it out, tab was bent. I am concerned if this engine will have enough fuel with the 5/16 feed line.
What engine are you running? There is information out there on sizing fuel lines. I am running 1/2" from the pickup to carburetor (dual Edlebrock 650cfm).
-
Senior Member
Originally Posted by
68GT500MAN
What engine are you running? There is information out there on sizing fuel lines. I am running 1/2" from the pickup to carburetor (dual Edlebrock 650cfm).
I figured a way to use 3/8 (6AN) all the way, that should feed her okay. I used that in the old days with a 650hp small block drag car.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor