guys I am wanting some trimplates that cover the door latch cutouts on the edge of the door.
I have seen some on photos of other coupes. can anyone give me the name of the person that
is making these.
Thanks
Visit our community sponsor
guys I am wanting some trimplates that cover the door latch cutouts on the edge of the door.
I have seen some on photos of other coupes. can anyone give me the name of the person that
is making these.
Thanks
If you are referring to the ones on the door, they came with the car.
Marc
It's just A Matter Of Time
Marc
FFR Coupe 434, 347ci, Power Brakes, SAI Mod, 3 link rear
I bought the coupe used, builder may have not put them on. looked at FFR parts catalog and they don't list
them.
Oh...
They are pretty easy to make if you have a metal brake.
Hopefully someone can offer up theirs if they aren't using them.
I would also try Factory Five...I'm not sure how much they would charge you but you can ask. I would think the fit from gen I to Gen II should be unchanged.
Marc
Last edited by Fluge; 01-19-2014 at 08:55 PM.
It's just A Matter Of Time
Marc
FFR Coupe 434, 347ci, Power Brakes, SAI Mod, 3 link rear
PM sent, Hank.
Dan
Coupe #497 delivered 7/29/10. Engine in on 10/1/10. Pushcart on 10/4/10. First start on 12/01/10. First go-cart on 12/31/10. Finished and on the road as of February 2012.
Coupe Body Buck Plans - My Spray Booth - Painting Lessons Learned
Build site: www.bamacoupe.blogspot.com
Lots of build photos and some observations: http://www.flickr.com/photos/53614858@N05/