Visit our community sponsor
Thanks:
0
Likes:
0
-
Senior Member
Help - RF Harness speed sensor connector
I pulled the speed sensor wire connector off the Ron Francis rear wire harness by accident last night.
Can anyone show me how to fix this?
Here's a picture.
Looks like the wires pulled out of the pins inside - but that really should not have happened right?
Thanks for any help on this...
img_8062-wty-coup-speed-sensor-cable.jpg
-
Senior Member
Ask Ron Francis. http://www.ronfrancis.com/inforequest.asp
He is very good at getting back to customer inquiries.
-
Senior Member
I personally wouldn't try to re-use the pins. I would splice a new connector onto the end of the RF wires. I just happened to have that connector with two 7 inch long wires attached. Brand new. Bought it from Mike Forte several months ago for my Mk4 build, thinking the RF connector was different than the electronic pickup on the TKO600. Turns out it's not, and the RF connector plugs right on. So I don't need it. I think it was $10-15. Would need to look at the receipt in my files somewhere. Willing to sell it for a reasonable offer and drop in the mail to you. PM if interested.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
Build 2: Mk4 Roadster #7750. Sold 04/10/2017.
Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020.
Build Thread and
Video.
Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020.
Build Thread and
Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023.
Build Thread. Sold 11/9/2023.
-
Senior Member
Solved - thanks
Thanks everyone - I called RF and talked to Chris - best to put a new connector on. $15 or so, not bad for fixing a goof I caused.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor