Ok, I've been searching all over for m10x1 to 3/16 brake line adapters and can't find the correct ones. Where's everyone getting theirs from?
Visit our community sponsor
Ok, I've been searching all over for m10x1 to 3/16 brake line adapters and can't find the correct ones. Where's everyone getting theirs from?
I went to the local car parts store. Advance, in my case. Maybe I lucked out, found it at the first stop. Here's a pic of the pack.
image.jpg
Rich
818S in progress. 2007 WRX sedan donor.
Powered up: 7-8-14, First Start: 7-20-14, Go kart: 8-19-14
Here is a link where I got my fittings
http://store.fedhillusa.com/22nutpack.aspx
Napa
Dan
818S #17 Picked up 8/1/13 First start 11/1/13 Go Kart 3/28/14
Autozone....lol
FFR 1879, Blown DSS 306,REDLINE management, VeryCoolParts Tuned 460RWHP
FFR 818S, The Flash, Chassis #5, 2.0L, LSD, Electromotive TEC-S, VCP Tuned, 278RWHP 265 RWTQ
FFR 6651, Green Lantern, 408W Crate, Hellion 66mm Turbo, JGS Waste gate / Blowoff valve, Tec-GT management, VCP Tuned, 575 RWHP, 690 RWTQ
FFR 8335, Black Mamba, 289 FIA CSX 2001 tribute car, 347, 48 IDA webers, VCP Tuned, 311 RWHP 386 RWTQ, 3-link, Trigo's
FFR 0004, Gen 3 , Hawk Coupe, Coyote twin turbo, 683 RWHP 559 RWTQ, IRS, VCP Tuned. "not too shabby"
US ARMY Maintenance Test Pilot (CW4 Retired)
Did FFR not provide enough? I haven't done my rears yet so I haven't counted.
A well stocked beverage fridge is the key to any successful project.
Thanks for the help. None of my auto parts stores here carry them with the inverted flare and I've had trouble finding them online. FFR did not provide any Metric to Standard adapters.
I got adapters from FFR, I swapped the adapter for removing the std fitting and going to a metric end on the brake master for clearance
Dan
818S #17 Picked up 8/1/13 First start 11/1/13 Go Kart 3/28/14
Oops, ok, I was showing not adapters, but replacement metric fittings to use with the 3/16" brake lines. Meaning, cut off and toss the standard, supplied fitting, replace with metric fitting and reflare. I'm using ABS, so I was already going to need additional fittings and with plenty of flaring to do. More adapters might be harder to source. FFR will provide them if they forgot them. Take stock and tell them what's missing and they'll ship it to you right away or as it becomes available (if backordered). I hope that helps. Ill keep an eye out for more adapters.
Rich
818S in progress. 2007 WRX sedan donor.
Powered up: 7-8-14, First Start: 7-20-14, Go kart: 8-19-14
How many do you need? I may be able to find a couple laying around as I didn't use them all. I just don't honestly remember where I put them, lol.
Rich
818S in progress. 2007 WRX sedan donor.
Powered up: 7-8-14, First Start: 7-20-14, Go kart: 8-19-14