Right, how much should I get? Is this the stuff?
http://www.amazon.com/TechFlex-Woven.../dp/B00C1O7SO4
Visit our community sponsor
Right, how much should I get? Is this the stuff?
http://www.amazon.com/TechFlex-Woven.../dp/B00C1O7SO4
Sorry, the link didn't work in my previous post, I fixed it. There are two variants, the red-logo F6 and a green-logo, also called F6, version. The green stuff is a bit more expensive and has higher heat tolerance, I used that for wires near the engine. I've gone through about 20 feet of 1/2 inch and 20 feet of 1/4 inch so far. I stripped my entire harness, so I have a lot more bare wire than some.
Thanks a lot, I'll check those out. I also stripped my entire harness.
The third brake light looked a bit thin to me after I got it in, so I did it again with 3/8 acrylic...
Here's how it looks installed:
I still have to clean up the opening a bit and wait for the new LED strip to come in.
This is the bracket that will hold the strip on?
Frank
818 chassis #181 powered by a '93 VW VR6 Turbo GT3582R
Go-karted Aug 5, 2016 - Then May 19+21, 2017
Tracked May 27/July 26, 2017
Build time before being driveable on Sep 27, 2019: over 6000h
Build Completed Winter 2021
LED strip will be siliconed to the inside of the lens. The lens bolts up to the bracket, which is glued to the body.
My car "looks finished", but I still have a lot of detail work to do. Here is where it's at right now:
I got these parts, guess what I'm making.
818S #22 Candy Blue Frame, Front Gas Tank, 2.5L Turbo, Rear radiator, Shortened Transmission, Wookiee Compatible, Console mounted MR2 Shifter, Custom ECU panel, AWIC soon
My Son Michael's Turbo ICE Build X22 http://thefactoryfiveforum.com/showt...rts-818S-Build
My Electric Supercar Build X21 (on hold until winter) http://thefactoryfiveforum.com/showt...e-Build-Thread
Bingo. I'm go to try to make one of these:
Jaime, Just bumpin the thread, wondering how things are going. I myself have just bought a donor car, I was kinda wondering if you still had the car. And wouldn't mind meeting up. I wanted to see one in person, and before I get too into this build want to make sure this is the ave. I want to go down.... I also live int the WNY area. Cheektowaga to be exact.
Last edited by josh3143; 07-06-2017 at 02:23 PM. Reason: misspelled name