Visit our community sponsor
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
Wayne,
Keep us posted on how quick you can build this.
Is this car going to be stock or will it get all the VCP goodies?
Does this car go back to the customer or are you going to race it?
Bob
818S #22 Candy Blue Frame, Front Gas Tank, 2.5L Turbo, Rear radiator, Shortened Transmission, Wookiee Compatible, Console mounted MR2 Shifter, Custom ECU panel, AWIC soon
My Son Michael's Turbo ICE Build X22 http://thefactoryfiveforum.com/showt...rts-818S-Build
My Electric Supercar Build X21 (on hold until winter) http://thefactoryfiveforum.com/showt...e-Build-Thread
you got a steal on these parts... looking forward to seeing this buildup.
A well stocked beverage fridge is the key to any successful project.
Warning to Newbies: One hour of Wayne's work equals one week of work by us normal guys.
818S/C : Chassis #25 with 06 WRX 2.5 turbo, ABS, cruise, PS, A/C, Apple CarPlay, rear camera, power windows & locks, leather & other complexities. Sold 10/19 with 5,800 miles.
Mk3 Roadster #6228 4.6L, T45, IRS, PS, PB, ABS, Cruise, Koni's, 17" Halibrands, red w/ silver - 9K miles then sold @ Barrett-Jackson Jan 2011 (got back cash spent).
It took us 19 hours to have a roller with the steering rack and pedal box installed. Wayne is super human.
Tamra
Building 818SR #297 picked up 10/25/14 with Andrew (xxguitarist)
First start 12/21/14, First "drive" 1/17/15
First Dyno at EFI Logics 3/7/15- 310whp at 15psi for break in, full spool by ~3500rpm!
First autocross 3/29/15
1st Registered 818 in Connecticut 7/24/2015. 9 months - 1 day from kit pickup!
All of the brake and clutch lines were done in that 4 hours too
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
He doesn't have to waste all that time where we look at what we have and have to figure out what to do, he has been there before. My second body install was more than 5x as fast.
Dan
818S #17 Picked up 8/1/13 First start 11/1/13 Go Kart 3/28/14
Well nothing to report today as work got in the way of the 818...
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
Boo work!
Go speed racer go!
Zero Decibel Motorsports
Check out my new website!
www.zerodecibelmotorsports.com
www.facebook.com/zero.decibel.motorsports
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
At this rate your going to be go karting this weekend.
Here is the 10 hours compressed into 5.5 min...
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
Huh... Looks like regular speed to me. Where's the rest of the 9.9hrs.
Last edited by flynntuna; 06-18-2015 at 07:15 PM.
7 days?
First, how can you build something in 7 days when it takes us 1-2 years and second are your days 12-15h or 24h of work? Just kidding. That's going to be an awesome challenge! Let's see in 4 days! Clock is ticking Wayne, go back to work.
Frank
818 chassis #181 powered by a '93 VW VR6 Turbo GT3582R
Go-karted Aug 5, 2016 - Then May 19+21, 2017
Tracked May 27/July 26, 2017
Build time before being driveable on Sep 27, 2019: over 6000h
Build Completed Winter 2021
Ha, maybe I should have said 7 work days. I have to get parts out the door for you guys in between
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
Here's your motivation, not going to happen!!!
818S frame #13 Jdm version 8 ej207
Dang!!! go on with your BBBAAAADDD self!
Nolan
65 coupe Gen 3 "Phoenix" build
http://thefactoryfiveforum.com/showt...032#post297032
818 s (with r windscreen ) 350 rwhp. Registered and street legal (SOLD)
Any concern with the amount of weight hanging over behind the rear set of jack stands in that video? The entire motor/trans is behind that plane at one point without much up front (say about the 3 minute 11 second mark for example).
Just curious since I will be finishing off some of the underbody aluminum panels, etc in the coming weeks and I have generally put my lift arms back near the motor mounts. Won't be able to do that soon.
Thanks!
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
I've actually found that where Wayne has his jack stands is just about the center of gravity. When I support mine there I can lift either end with barely any effort.
Zero Decibel Motorsports
Check out my new website!
www.zerodecibelmotorsports.com
www.facebook.com/zero.decibel.motorsports
I went to the front of the car and lifted by the radiator support while standing on a scale and it took 142 lbs of additional lifting to hold the front end.
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
awesome. thanks for the quick responses.
I use the same points
Dan
818S #17 Picked up 8/1/13 First start 11/1/13 Go Kart 3/28/14
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
I love those brakes! But they don't look like the 6-piston ones, they look 4-piston with black discs.
2 days left. Or about...
Frank
818 chassis #181 powered by a '93 VW VR6 Turbo GT3582R
Go-karted Aug 5, 2016 - Then May 19+21, 2017
Tracked May 27/July 26, 2017
Build time before being driveable on Sep 27, 2019: over 6000h
Build Completed Winter 2021
Wayne you lost your bet unless....???
Superwayne jumps in and gets it done. image.jpg
818S frame #13 Jdm version 8 ej207
Thanks- Chad
818R-SOLD!!!- Go Karted 7/20/14/ Officially raced NASA ST2- 2/28/15
2016 Elan NP01 Prototype Racecar Chassis #20
1969 Porsche 911ST Vintage Race Car
1972 Porsche 911T (#'s matching undergoing nut & bolt resto in my garage)
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
How is the project coming? its like my favorite TV show got cancelled mid-season
I've been slammed at work, prepping 2 race cars, helping a friend change a motor in his 07 F150 4wd and was at the Ultimate Track Car Challenge yesterday. GM gave GRM a "track ready" 2016 Camaro to play with and I got 25 laps in it yesterday.
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
How come that Camaro doesn't want to go around the corners like an 818?
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
Wayne, how does this 7-day R look like, now?
Frank
818 chassis #181 powered by a '93 VW VR6 Turbo GT3582R
Go-karted Aug 5, 2016 - Then May 19+21, 2017
Tracked May 27/July 26, 2017
Build time before being driveable on Sep 27, 2019: over 6000h
Build Completed Winter 2021
It will be complete after the 66 fast back and a customer 818 are done. Something about real work getting in the way of fun work.
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
off topic but Wayne how do you keep your bottom hose from rubbing the bellows? or has this rub been corrected?
A well stocked beverage fridge is the key to any successful project.
I'm using the hard lines and the rub is so slight that it's a non issue.
Wayne Presley www.verycoolparts.com
Xterminator 705 RWHP supercharged 4.6 DOHC with twin turbos
I have the hard line too, and my rub was very minor, but I figured it would be worse when the car was lowered as the tierods will come up. I got Rori's spacer and I have a 1/4" now.
TY.
A well stocked beverage fridge is the key to any successful project.