Best $3 I've ever spent!!!
7UtWtsR.jpg
8avOFG1.jpg
Visit our community sponsor
Best $3 I've ever spent!!!
7UtWtsR.jpg
8avOFG1.jpg
Owner/builder - AEM Intakes 818R #85
Holy cow! Thats fast!
Very nice, got video?
With a bit more traction that's an easy mid 11 second ride. And with traction a mid 3 second 0-60. Very nice.
Mike............
FFR2100 - 331 with KB supercharger - T5 - 5 link rear 3.08's and T2 Torsen.
Video - https://www.youtube.com/watch?v=stQD...ature=youtu.be
Thanks!
This was on street tires with full aero too. I'm positive that if I went back with some taller radials and got that 60' down to 1.8-1.9 it would be a mid/low 11. I managed a 2.0 60' my last run but missed 4th gear. A tenth on the 60' is 3 on top, so that could have been an 11.6 second run. Being able to keep it in 4th would help too, you lose a tenth or more per shift.
Not bad for a car that is NOT intended for drag racing at all.
Last edited by SixStar; 08-24-2015 at 11:35 AM.
Owner/builder - AEM Intakes 818R #85
At 5380' to boot.
I have done some street runs and came close to what your getting. I feel on a strip I could pull a low 11 or high ten with right tires and practice. I got 8,500 top end which helps me hold the gears longer and shift less. I get to like almost 140 in 4th. Very nice bro!!!!!
My only complaint is how the car drives on average roads. It loves to chase the uneven pavement and makes it hard to drive if the road is not really nice. Maybe a bump steer kit and more precise alignment.... More caster, corner weighted.. Idk. I think I just have to tune the suspension more.... Ah more time
818S frame #13 Jdm version 8 ej207
Thanks- Chad
818R-SOLD!!!- Go Karted 7/20/14/ Officially raced NASA ST2- 2/28/15
2016 Elan NP01 Prototype Racecar Chassis #20
1969 Porsche 911ST Vintage Race Car
1972 Porsche 911T (#'s matching undergoing nut & bolt resto in my garage)
What are optimum suspension alignment specs. to avoid the tramlining that you mention? My 818S too is scary to drive on all but perfectly flat pavement. What bump steer kit?
I got the Baer bumpsteer kit from Summit Racing.