2 inch roll bar?

[jetsbaby]

Is the 2 inch roll bar still available?..I would like to buy one in bare steel for the passenger side for my MK3.1 roadster.

[AC Bill]

Keep an eye open on the classifieds for one, I see them come up from time to time..at fair prices.

[Brian Z]

Call FFR to check the availablitlity. Im not sure if we have any stock left to make a bare MK3 roll bar, but we probably have some coated ones in stock.

Best regards,

[AC Bill]

Brian, Do you know if FFR is going to keep some replacement parts stocked for the MKIII on an ongoing basis?

I'm worried that if an older model Roadster was involved in a collision, that needed parts to repair it may become obsolete. That would suck big time..(Now if it was roll bars that were damaged, the car is likely a write off anyway..lol) I was thinking of things like a MKIII trunk lid, hood, perhaps doors, hinges, lights, maybe even a frame.. etc..Most manufactures carry replacement parts for at least ten years, after the end of a models production.

[Brian Z]

Bill,

We will carry alot of the Mk3 replacement parts for a while. We still have the molds for the Mk3 hood, bodies and trunk. We carry the trunk hinges. Alot of the Mk4 pieces, like the hood hinge, doors and the trunk will work on the Mk3 cars. The frame has changed and the frame jig has been converted over to the Mk4 style only. If you need a replacement frame, you will probably need a body too so it shouldn't be an issue. =)

Best regards,

[shagydeep]

Hello,
Sure this will available to the local garage also. You might be check out from scrap dealers...

[John Rocha]

If you still need one, i have a spare pass side roll bar but it is chromed