Forte's

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Sidepipes position sitting low

  1. #1
    Member AZJoker's Avatar
    Join Date
    Feb 2011
    Location
    www.jasonleenye.com
    Posts
    75
    Post Thanks / Like

    Sidepipes position sitting low

    I have a MKII Spec Racer. Once bolted on the J-Pipes, pipes sit lower than the body cut out. Is it possible to bend the J Pipe? Not sure how to fix this problem.

  2. #2
    Member AZJoker's Avatar
    Join Date
    Feb 2011
    Location
    www.jasonleenye.com
    Posts
    75
    Post Thanks / Like
    Here is an old pic before it went to paint.sidepipes.jpg

  3. #3
    Senior Member Gordon Levy's Avatar
    Join Date
    Feb 2011
    Location
    Maricopa AZ
    Posts
    1,277
    Post Thanks / Like
    Put a jack under the front of the sidepipe, loosen up the J pipe, jack the sidepipe into the position you want it and hammer the J-pipe bolts with an impact gun. It will stay.
    99/2000 NASA PSO Champion-2005 west coast FFR challenge series Champions
    Sponsor Tony B's 2007 ST2 National Championship
    2009 NASA TTC runner up-2010 NASA TTB runner up

  4. #4
    Member AZJoker's Avatar
    Join Date
    Feb 2011
    Location
    www.jasonleenye.com
    Posts
    75
    Post Thanks / Like
    Quote Originally Posted by Gordon Levy View Post
    Put a jack under the front of the sidepipe, loosen up the J pipe, jack the sidepipe into the position you want it and hammer the J-pipe bolts with an impact gun. It will stay.

    Thank you Gordon. Will try this

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Stewart Transport

Visit our community sponsor