![Forte's](https://www.factoryfive.com/wp-content/uploads/2015/04/fortes.gif)
Visit our community sponsor
![Thanks](https://thefactoryfiveforum.com/dbtech/thanks/images/thanks.png)
Thanks:
0
![Likes](https://thefactoryfiveforum.com/dbtech/thanks/images/likes.png)
Likes:
0
-
Fuel System Connections
I am in the process of installing my fuel system hard lines. I'm using 3/8" tube in combination with Aeroquip Starlite soft lines. I have -6 AN male fitting coming out of the tank connection (Breeze pn 70736) and make that connection with a female -6 AN fitting to the soft line. At the other end I would prefer to connect the soft line to the 3/8" hard line using -6 AN fittings. I'm not sure how to do this. As well, where the 3/8" hard line connects to my Holley inline fuel filter I am curious how best to make that connection. The fuel filter has 3/8 NPT female threads. Would I use a 3/8" NPT to 5/8-18 inverted flare connecting my hard line to that?
Any help is appreciated.
Thanks
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![FFMetal](https://thefactoryfiveforum.com/attachment.php?attachmentid=195371&d=1707243047)
Visit our community sponsor