I've been trying to find some info on this and thought maybe it could be consolidated. Being in Canada I need to try and round as much as I can to get it to the border to get it all in one shot.
Im going to be using a LS7 w/ intake and Kooks headers. Maybe a small cam too.
Clutch.
Flywheel is a LS1/LS6 flat friction surface
JEGS# 601260 1997-2004 GM LS1/LS6 Flywheel
Chevrolet Flywheels
1997-2004 GM LS1/LS6 Flywheel
Fits 5.7L LS1/LS6
Utilizes 11.0" Clutch
168-Tooth, 14-1/8" Diameter Ring Gear
24.4 lb. Total Weight
Replaces GM 12554130N
1997-2004 Corvette
1998-2002 Camaro/Firebird
Pressure plate & clutch disc is a unit to fit above flywheel
Examples:
Kennedy Engineering part# KEP-S11/KEP-GMP11 with GM 26 spline, sprung hub street disk & stage 1 plate
SPEC Stage 1 clutch kit, SPEC part number SC091
SPEC Stage 2 clutch kit, SPEC part number SC092
EXEDY clutch kit and flywheel package part #04173
Pilot bearing, standard LS Gm?
Yes, Standard GM pilot bearing
Slave cylinder provided by Mendeola.
Yes, 7/8" bore.
Maximum travel 1 1/8".
CNC SLAVE INSTRUCTION-1.jpg
What will be the best MC size to use as I dont have these yet?
3/4 is standard unit from what I understand from FFR manual.
Whatever MC is used we recommend an adjustable clutch pedal stop.
What is the end fitting?
3/16" standard American brake line fitting
Starter - confirmed to be the IMI 140 and needs cleareancing/heat wrap. Seperate post stated MSD won't work.
Correct
CVs - what is needed?
1976-1984 Porsche 911 Turbo 40mm Wide CV joints
Part #: 93033203400
Reverse Switch - included ?
Included
VSS - Mount or location provided?
Yes
Shifter - Sold by FFR? Mendeola? Est costs?
FFR is providing Information and mounting of this unit.
Mounting - will it bolt to existing mounting points?
FFR will provide mounting brackets.
When I ordered my GTM I stated I was using the mendeola. What is included from ffr vs the porsche box?
FFr should be providing everything to bolt the unit in.
Missing anything?
Breather box
oil cooling/circulation system
temp. gauge and sender
10mm x 1.50 bolts for CV's
Thanks for any info on this.