You are invited to place any items that you may want to sell, (or are looking to buy), in this thread area. This offers the advantage to builders, north of the border, to be able to purchase parts without delays at Canada Customs, and perhaps additional brokerage fee's, taxes, etc.
Does any of the Canadian GTM builders have the FFR cold air intake or roof scoop that they want to sell? Possibly from the last sale that FFR had which was free when you purchased kit, and you don't need or want to use. I will pay for shipping of course.
Powder coated Black Mk 4 Roll bar (Single - Drivers side). I ordered a chrome one with my kit but received a black one instead. Once I get the Chrome one delivered I will give this one away to anyone who is interested. No Charge, you just pay the shipping costs. First come first served.
Hello all, I am cleaning out the garage and I would like to get rid of some unused parts and thought I would try the Canadian region first as the shipping costs to the states tends to ruin the deal. All prices are OBO + shipping. You're welcome to pick up here if you're in the area.
2X FFR supplied air filter- new $25 each
2X FFR supplied serpentine belt- new $10 each - Sold
Tangent 2" Roll Bar Kit for MK3-painted but never installed $50 - Sold
FFR wind wings with hardware- new $70 Sold
FFR passenger side mirror- new $25 Sold
2X FFR supplied p/s rack adapter- new $25. Each
2X FFR supplied quick jack bumpers-new, uncoated $25/set
Flaming River Manual rack u-joint- used $25
2X FFR supplied hood pin kit - Free
Donor Rad and 2 shrouds - Free for pick up
Donor P/S Rack - Free for pick up. Spoken for.
Donor P/S pump and bracket - Free for pick up. Spoken for.
Donor air pump - Free for pick up
FFR supplied oil filter relocation kit - $25 Sold
A/C eliminator pulley and spacer kit - $20
PM me if you want more details.
Cheers,
Bill
Last edited by billybobracing; 02-05-2012 at 12:44 AM.
FFR6843 Finished May 2010 - Sold
FFR7366 Finished Sept. 2012
Any one looking for a 390FE big block donor engine in Canada?
A buddy of mine has a 390FE in a Ford F250 p/u truck, that he wants to sell complete. I believe it is a 73 Camper Special. It even includes a camperette. Pull the motor, and sell the truck and camper, or perhaps part it out. Truck is old, but still lots of good parts perhaps for a guy doing a truck restoration.
I heard the engine running yesterday and it actually sounds pretty good! Not sure of the exact miles on it, but it has at least 100,000. Odo reads 21,000. It currently has a 2Bbl carb, and the C6 tranny, (c/w cooler). Head gaskets done not so long ago, and carb overhauled.
This would be a heck of a donor engine, and the added benefit is you can drive it home, (and camp along the way).
Partial build Spyder GT for sale 80% complete. I have my Spyder GT for sale as I am moving. If interested email me and I will send pictures etc. The car is in Edmonton. Thanks Ben [email protected]
I have all of the parts save the subframe for an IRS set up.
-Thunderbird Supercoupe Diff, driveshaft, hubs, brakes
-8.8", Tractionlock, 3:27
-Factory Five Racing upper and lower tubular control arms
-Proshock coil-overs
I have about $2,200 in it, open to reasonable offers, probably unreasonable ones as well...
Hello I have a running 1997 Subaru outback,i,m sure there are lots of parts that can be used to put together an 818 car,manual tranny,selling in the Toronto area ,selling for$ 500.00 dollars. call 416-467-6377 yanni
Hi, just ordered my kit and have been searching the Edmonton area for Fox Mustang parts. 8.8 rear, suspension, pedal box, etc. Anyone in the Edmonton area have or know of a car being parted out? I don't want a full donor as I only need a few parts the rest will be new.
I have a set of roadster pin drive old style IRS control arms as well as a set of standard IRS half axles for sale. Both real cheap. See ads under Joecobr. I live in Ancaster, Ontario, outside Hamilton.
I have a push button start / rfid system. Guard Dawg Ikey. It doesn't fit with my roadster build.
600 USD if you have 300 CAD and promise not to tell my wife we have a deal.
Have complete 818C kit imported into Canada (ontario) with full 2002 WRX donor and FF5 goodies that I am including FOR FREE - JUST ASKING FOR PRICE OF KIT!!
So this sticky in the Cdn forum states "Attention Canadian builders.
You are invited to place any items that you may want to sell, (or are looking to buy), in this thread area. This offers the advantage to builders, north of the border, to be able to purchase parts without delays at Canada Customs, and perhaps additional brokerage fee's, taxes, etc."
So this sticky in the Cdn forum states "Attention Canadian builders.
You are invited to place any items that you may want to sell, (or are looking to buy), in this thread area. This offers the advantage to builders, north of the border, to be able to purchase parts without delays at Canada Customs, and perhaps additional brokerage fee's, taxes, etc."
So why did you remove my post ???????
So I am not an admin but I know the answer. This area is for builders to sell parts they have that are extra or from a donor. This does not allow vendors to sell items directly. If you are trying to sell door panels off your own car, or a set that you bought and decided you are not going to use then you can sell them. But, if you are trying to sell door panels that you are making and want to sell a bunch of them then you are a vendor.
They have a vendor program that allows a vendor to be part of the vendor program and sell all you want. But there is a vendor fee that helps pay for the sites operation. So pay the vendor fee, get your vendor badge on your account and then you can sell all you want.
I have a '94 SN95 Cobra 8.8 complete with brakes I need to trade or sell. Looking for a newer 2005-2014 style for a truck build. I'm located in Summerland BC. Let me know if you have what I need or want what I have.
I have a pair of polished stainless steel side exhausts for the MKIV Roadster, complete with mounting hardware. Brand new, never mounted, and still in the original shipping box from Factory Five. New from FFR is US$1275 + shipping. I'm thinking $1000 + cost of shipping in Canada.
Hi all. Sadly, I’ve accepted that getting my Ontario build into Italy, although possible, is well beyond my financial means, and still carrying a low success rate of ever being street-legal. As such, I’m selling my 818C.
I’ll post this thread in the main cars for sale as well (if my account can be upgraded).
818C Coupe (with Canadian completion kit) - licensed in Ontario
- FFR aluminum shifter upgrade
- Race splitter
- Side skirts
- Diffuser
- Street spoiler
- FFR wheel set
90% complete, running, registered.
Engine:
JDM EJ207 v9
New timing chain, water pump, thermostat
New radiator
New battery
Transmission:
5 speed, pull type
Cusco LSD
Greddy Stage 1 clutch and flywheel
Wiring harness and reflash by iWire
Interior:
New sport seats
EZPete’s Heating &AC setup (roughed in)
Dynomat
FFR steering wheel
Other:
Brembo brakes
Bump steer kit (not installed yet)
Second exhaust (more subdued)
Race Logic Traction Control system (roughed in)
New walbro fuel pump (350 I think, would need to look through the receipts to confirm)
Wiper kit
I was able to complete about 75% of the build myself, however due to an extended period away I send to a certified builder to complete the build for export. Unfortunately, my export window was missed, and the work from the builder was substandard so I can no longer bring my car to Italy (without substantial import duties and red tape).
Although I used an Ontario donor, I ended up using new parts wherever possible, including almost all fasteners.
Also for sale is my full set of tools, including everything from hand tools to engine hoist, to an 80L compressor.
Like so many who have to sell their projects, this is breaking my heart. When putting this build together, I didn’t cut corners and this was going to be my “forever” hobby.
Thanks: 
Likes: 
Reply With Quote
. 
Originally Posted by Albeix
