Boig Motorsports

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 9 of 9

Thread: Need some rear wheel/tire size advice

  1. #1
    Senior Member
    Join Date
    Jul 2017
    Location
    The Villages Fl.
    Posts
    152
    Post Thanks / Like

    Need some rear wheel/tire size advice

    I have spent today reading every post in the wheel/tire forum and I am still confused.
    I want to put 255/40/18 tires with 18x8 wheels with 45mm offset on the rear of my 818s.
    The tire is 26" in diameter. Is that too large? Will it rub?

  2. #2
    Senior Member Bob_n_Cincy's Avatar
    Join Date
    Sep 2012
    Location
    Cincinnati OH
    Posts
    3,911
    Post Thanks / Like
    Quote Originally Posted by redbudrr View Post
    I have spent today reading every post in the wheel/tire forum and I am still confused.
    I want to put 255/40/18 tires with 18x8 wheels with 45mm offset on the rear of my 818s.
    The tire is 26" in diameter. Is that too large? Will it rub?
    I am successfully running 255/40/17 tires with 17x9 wheels with 30mm offset.
    To keep them from rubbing I'm running street ride height with driver and passenger sitting in car. OEM trailing arms.
    Also running 500 rear spring to lower travel and body roll.
    Everything is tight clearances. To go any bigger, I would look at fender flairs.
    Bob

    rear tire.jpg

    PS: In this picture you can see my cold air intake in the side scoop. I think this is important as the air in the engine bay can be much hotter.
    Last edited by Bob_n_Cincy; 09-10-2017 at 08:17 PM.
    818S #22 Candy Blue Frame, Front Gas Tank, 2.5L Turbo, Rear radiator, Shortened Transmission, Wookiee Compatible, Console mounted MR2 Shifter, Custom ECU panel, AWIC soon
    My Son Michael's Turbo ICE Build X22 http://thefactoryfiveforum.com/showt...rts-818S-Build
    My Electric Supercar Build X21 (on hold until winter) http://thefactoryfiveforum.com/showt...e-Build-Thread

  3. #3
    Senior Member
    Join Date
    Sep 2016
    Location
    Saint Charles IL
    Posts
    136
    Post Thanks / Like
    5x100 Enkei RPF1 17x9 +35 with 245/40/27 Dunlop Direzza ZII Star Spec (works in the rear with about 10mm of space from the trailing arm. No other fitment issues. Don't work in the front at all).
    5x100 Enkei RPF1 17x8 +45 with 225/45/17 Blizzak WS80 (these do not work well in the front as they hit the sway bar end links, and fender liners).
    5x100 Enkei RPF1s 17x8 +45 front, 17x9 +35 rear with 215/45/17 Falken Azenis RT615K+ and 255/40/17 Falken Azenis RT615K+ fit well, front tires rub at full lock with and without a 5mm spacer up front.

    https://tiresize.com/comparison/ Use this tool to compare sizes. It was helpful for me to try/error on sizes.

  4. #4
    Senior Member SixStar's Avatar
    Join Date
    Feb 2013
    Location
    Westminster, MD
    Posts
    638
    Post Thanks / Like
    zajzvUk.jpg

    255/40-17 on 17x9 in front
    285/30-18 on 18x9.5 in back
    Owner/builder - AEM Intakes 818R #85

  5. #5
    Senior Member
    Join Date
    Jun 2013
    Location
    Bowling Green, KY
    Posts
    1,382
    Post Thanks / Like
    225's on 17X8 and 265's on 18X9.5 40mm offset
    had 235/40X17 on the front (BFG R1s) on the front, the tires did rub under hard braking and high load corners.

  6. #6
    Junior Member
    Join Date
    Mar 2017
    Posts
    17
    Post Thanks / Like

    Question for SixStar

    Quote Originally Posted by SixStar View Post
    zajzvUk.jpg

    255/40-17 on 17x9 in front
    285/30-18 on 18x9.5 in back
    What wheels are you running? Is your car wrapped?

  7. #7
    Senior Member
    Join Date
    Jul 2017
    Location
    The Villages Fl.
    Posts
    152
    Post Thanks / Like
    I have not purchase wheels yet. That is why I am asking the question. I have purchased tires, which were at a great price that I could not pass up. The rears concern me because of the diameter being 26 inches. I am pretty sure I will be ok up front, but the rears concern me.

  8. #8
    Junior Member
    Join Date
    Mar 2017
    Posts
    17
    Post Thanks / Like
    Yeah that question was for Six Star.

  9. #9
    Member WonderDude's Avatar
    Join Date
    May 2012
    Posts
    85
    Post Thanks / Like
    I realize this thread is old. But I feel the need to share this site: http://www.rimsntires.com/specspro.jsp

    I find it very helpful when ever I am considering a change in tire/wheel size.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Brown County Customs

Visit our community sponsor