Visit our community sponsor
Thanks:
0
Likes:
0
-
Senior Member
You're talking about the rectangular "sock" that goes on the bottom of the fuel pump? Engages a round extension on the bottom of the fuel pump into a mating location roughly in the center of the sock? If so, I'm sure you've seen the metal clip retainer on the sock filter. You have to have it lined up just right and get a solid push for that retainer to engage onto the fuel pump. I use the edge of my workbench and put a little weight into it. Can be stubborn, but you have to push hard enough for the metal retainer fingers to flex. Wait until you try to get it back off.
Last edited by edwardb; 12-17-2018 at 03:53 PM.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
Build 2: Mk4 Roadster #7750. Sold 04/10/2017.
Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020.
Build Thread and
Video.
Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020.
Build Thread and
Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023.
Build Thread. Sold 11/9/2023.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor