-
Senior Member
I'm on the BOARD!!!! UPDATED with pics!
I posted this on both forums. Chatted with Dave B at Factory Five on Thursday and I have been put on 'the board' for Saturday morning pick up!! We will be making the 11-12 hour drive to just outside of Wareham on Friday, getting some sleep then we'll be showing up to Factory Five early Saturday morning. Pretty stoked to start on my version of our favorite car! Thanks to everyone for the pre build questions/answers and also the deals on all the parts needed to finish a Canadian kit! These forums rock!
Higgy
Last edited by Higgybulin; 04-04-2019 at 09:00 AM.
Reason: edit
MK4 #11012 picked up 04/16/24
351W, 3 link, single roll bar
MK4 #10616 picked up 4/10/23
302w, 4 link, 17's, dual roll bar SOLD
MK4 #9759 picked up on 4/3/19
351C, 3 link, 17's, dual roll bars SOLD
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Excellent. Don't forget pics of the pick up.
FFR MkII, 408W, Tremec TKO 500, 2015 IRS, DA QA1s, Forte front bar, APE hardtop.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Outstanding Higgy!! Should make for a loooong week in anticipation!
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Excellent news. Looking forward to following.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Have a good trip, Higgy! Don't forget the photos!
FFR MK4 #8317, 393 Cleveland, Lunati VooDoo solid roller, CHI 3V heads and intake, TKO 600, Std roadster seats, 8.8 3.55 diff, 17" Halibrand replica wheels, Ford "Magnetic Metallic", silver ghost stripe. (Sold 10/16/21)
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Congrats Higgy! You've been studying up for quit awhile!
Started dreaming of a Cobra around 1987
Purchased Complete Kit 6/9/2017, Delivered 9/4/2017, Rolling Chassis 3/30/2018, Engine Dyno'ed 3/4/2022, Engine installed 8/27/2022, First start 6/13/2024, Go Kart 8/19/2024
Click here for my build thread
Serial #9158
Design Engineer at BluePrint Engines
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Congrats!! Good luck sleeping on Friday night.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Higgy, where in Ontario are you? I’m in Alliston, not far from Barrie.
I made that drive to pick up 2 years ago, enjoy!
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Higgy-
I made a long trip up from the South with my son to get mine. I got a great tour, and got everything loaded up. It was a long couple days, but the ride home flew by as my son and I talked excitedly about the project!
Have a safe trip, enjoy, and let us know how it goes. All the best!
Regards,
Steve
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Congrats! always exciting to finally be taking delivery!!!
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Higgy,
Congrats and have a safe trip.
CVOBill
MK2 #???? Delivered 11/2002, Finished and Titled 6/2003 5.0, T-5, 4-Link, Sold 3/2005
Hot Rod #304 purchased 5/28/2017 from original owner Unassembled . Titled and plated 8/24/2017 Coyote,
TKO, 3-Link, Heat, A/C, Electric Power Steering, Convertible top
MK4 #9524 Picked up 1/18/19 306 Blueprint, T-5, 4-Link, Gas-N Pipes, Heater
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Should be quite an adventure. I had mine delivered so have never been to FFR, and would love the opportunity to see the place in the flesh.
Just make sure you have all the needed paperwork with you, for when you cross back into Canada, to prevent any hassles.
FFR6803RD, MK 3.1, 302 EFI, fr/rr disc brakes, WC-T5, c/w Hurst Competition Plus shifter, 3 link rear, Koni adjustable coil over shocks, dual roll bars, BBK 4-4 headers, 3.55 rear gears, BBK rear lower control arms c/w poly bushings. Ivy Green Metallic Arrived-02/08, On road 09/2010
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Member
Originally Posted by
HiggyMK4#????
Chatted with Dave B at Factory Five on Thursday and I have been put on 'the board' for Saturday morning pick up!!
Higgy
Higgy...I've been dealing with Dave B as well. He gave me a tour of Factory Five back in October. Top notch support!!
MK4 complete kit w/powder coated chassis, FFR power steering, 3-link solid Moser rear end w/ cast aluminum cover, low-back vintage racing seats, BluePrint 306 Carb, hydraulic clutch, CNC triple reservoir, Breeze radiator mounts and fan shroud, Metco drive loop, Derale PS cooler, CF dash.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Originally Posted by
Murd
Higgy, where in Ontario are you? I’m in Alliston, not far from Barrie.
I made that drive to pick up 2 years ago, enjoy!
I am just outside of Windsor but google maps says for me to come up your way instead of crossing in Detroit. Should save me almost 2 hours.
Thanks for all the well wishes!! Love the support from the forum family.
On a bad note...Unfortunately just found out I will be laid off from work for two weeks in April. Trip will be postponed one week till April 8th. Not really a big deal....yeah right!! I'm chomping at the bit. I feel like Stewart is delivering!! LOL Like I said not a big deal.
I will update with pics!!
Higgy
Last edited by Higgybulin; 03-27-2019 at 04:24 AM.
MK4 #11012 picked up 04/16/24
351W, 3 link, single roll bar
MK4 #10616 picked up 4/10/23
302w, 4 link, 17's, dual roll bar SOLD
MK4 #9759 picked up on 4/3/19
351C, 3 link, 17's, dual roll bars SOLD
-
Good luck and don’t forget to see if FFR will side you a free shirt of two. They did for me.
Mk4, Moser M88 rear end, Eaton truetrak, Craft Racing 461 Windsor, MMR pro trans, Glenn’s 1,000 hp cobra fuel system and lots of other parts.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Congrats. picked mine up about a month ago the guys were great. Yhey do a tour of the factory at 10 dont miss it
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Gettin’ Higgy with it!
Congrats
John
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
This at 9:15am local time for me!!! What are you going to get Higgy?
IMG_20190402_0917264.jpg
About 1pm, good ol' USA!
IMG_20190402_210221.jpg
And at 6pm....getting close!!
IMG_20190402_210228.jpg
Basically 11.5 hrs with gas stops. Bedded down at a Fairfield Inn about 15 mins from Factory Five.
Tomorrow is gonna be a good day!!!!!
Higgy
Last edited by Higgybulin; 04-02-2019 at 08:07 PM.
MK4 #11012 picked up 04/16/24
351W, 3 link, single roll bar
MK4 #10616 picked up 4/10/23
302w, 4 link, 17's, dual roll bar SOLD
MK4 #9759 picked up on 4/3/19
351C, 3 link, 17's, dual roll bars SOLD
-
Awesome! Enjoy the day tomorrow and post lots of pics.
MkIV Roadster build: Gen 2 Coyote, IRS, TKO600. Ordered 10/24/18. Delivered 1/29/19. Engine installed 8/8/21. First start 9/12/21. First go-kart 9/17/21. Off to paint 4/11/22. Back from paint 12/30/22.
Build thread here.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Are you even asleep????? So cool Higgy!
I’m so happy for you!!!!!
Kurt
If everything seems under control, you’re just not going fast enough....
Build thread
MKIV complete kit # 9395 delivered 7/31/18
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Where are the pics!
Started dreaming of a Cobra around 1987
Purchased Complete Kit 6/9/2017, Delivered 9/4/2017, Rolling Chassis 3/30/2018, Engine Dyno'ed 3/4/2022, Engine installed 8/27/2022, First start 6/13/2024, Go Kart 8/19/2024
Click here for my build thread
Serial #9158
Design Engineer at BluePrint Engines
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
This morning we arrived at the Factory about 8:50am and we were greeted by Dave B in the show room (no pic but it happened!).
IMG_20190403_230556.jpg
IMG_20190403_230603.jpg
Got directions to the back of the warehouse and headed on back!
Nate was handling the duties back there and made sure everything went smoothly!! He even apologized for the Lil Nor easter that rolled in this morning, lol. I'm Canadian bro! This is normal to us!!
IMG_20190403_230539.jpg
Took a few photos while we were loading up for the long ride home.
IMG_20190403_230531.jpg
IMG_20190403_230544.jpg
IMG_20190403_230535.jpg
Annnnnnd.....the cherry on the top was spending about 20 minutes talking shop with the Big Kahuna!!!
IMG_20190403_230527.jpg
Pulled out just after 10am and after gas stops and customs we were home in 12 hours.
1450 miles round trip. I update with total gas and toll costs but overall a very pleasant trip with my honey!!
MK4 #11012 picked up 04/16/24
351W, 3 link, single roll bar
MK4 #10616 picked up 4/10/23
302w, 4 link, 17's, dual roll bar SOLD
MK4 #9759 picked up on 4/3/19
351C, 3 link, 17's, dual roll bars SOLD
-
Post Thanks / Like - 0 Thanks, 3 Likes
-
Senior Member
So the Hemi was drinking like a fuel-aholic so gas cost about $600US. The state of New York helped themselves to $58US in tolls and Mass. hade their hand in my pocket for some tolls as well. They are electronic there so I wont see my bill till it comes in the mail. Stayed a night in a Fairfield Inn on points but that would have cost $124. Packed a cooler so the only meal we bought was some road side pizza for about $10. I will do it again in a heart beat!! More money for parts!!
Looks like my screen name will get a change as well!!!
Paper work says I am #9574!!
MK4 #11012 picked up 04/16/24
351W, 3 link, single roll bar
MK4 #10616 picked up 4/10/23
302w, 4 link, 17's, dual roll bar SOLD
MK4 #9759 picked up on 4/3/19
351C, 3 link, 17's, dual roll bars SOLD
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Woohoo! Congrats. Sounds like it was totally worth it to me.
Started dreaming of a Cobra around 1987
Purchased Complete Kit 6/9/2017, Delivered 9/4/2017, Rolling Chassis 3/30/2018, Engine Dyno'ed 3/4/2022, Engine installed 8/27/2022, First start 6/13/2024, Go Kart 8/19/2024
Click here for my build thread
Serial #9158
Design Engineer at BluePrint Engines
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Higgy, that it awesome!! So jealous, I would love to trek to FFR. Good luck with build, of course, will be following along.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Congratulations HiggyMK4#9574 - Let the real fun begin...
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Congrats!
Glad that it all went so well for you. No hassles at the border?
I presume FFR doesn't give you the wheeled dolly to keep. So once you wheel the body/frame out to the trailer, how do you get it in the trailer? Do a handful of FFR staff come out, and lift it in for you? Or, did you make a dolly ahead of time to take with you for the loading?
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Originally Posted by
AC Bill
Congrats!
Glad that it all went so well for you. No hassles at the border?
I presume FFR doesn't give you the wheeled dolly to keep. So once you wheel the body/frame out to the trailer, how do you get it in the trailer? Do a handful of FFR staff come out, and lift it in for you? Or, did you make a dolly ahead of time to take with you for the loading?
Bill, no problems at the border. They didn't even look in the trailer!!!
I did bring the frame dolly I made but since I didn't get my frame powder coated they just put it on the floor of my trailer. They have basically a 5" round steel tube that goes on the fork lift. On the end of that is a chain with two hooks that they hook on the trans tunnel frame, one guy drives the lift truck, one guy guides the nose in. Easy peasy!!
MK4 #11012 picked up 04/16/24
351W, 3 link, single roll bar
MK4 #10616 picked up 4/10/23
302w, 4 link, 17's, dual roll bar SOLD
MK4 #9759 picked up on 4/3/19
351C, 3 link, 17's, dual roll bars SOLD
-
Awesome now the fun starts. It was warm enough today I couldn’t help but put 20 miles on mine. If you need any other standard kit parts just let me know I still have a few from my build.
Mk4, Moser M88 rear end, Eaton truetrak, Craft Racing 461 Windsor, MMR pro trans, Glenn’s 1,000 hp cobra fuel system and lots of other parts.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Originally Posted by
HiggyMK4#????
So the Hemi was drinking like a fuel-aholic so gas cost about $600US. The state of New York helped themselves to $58US in tolls and Mass. hade their hand in my pocket for some tolls as well. They are electronic there so I wont see my bill till it comes in the mail. Stayed a night in a Fairfield Inn on points but that would have cost $124. Packed a cooler so the only meal we bought was some road side pizza for about $10. I will do it again in a heart beat!! More money for parts!!
Looks like my screen name will get a change as well!!!
Paper work says I am #9574!!
Way cheaper than the $1700 (1800 with tip) it cost to have it shipped by Stewart! Definitely well worth it, and you got to tour the plant too! I’m jealous!!!! Unfortunately not real feasible to pick it up from California. But on the California plus side I’ve met Dave a few times at the Huntington Beach show.... not to mention both Jeff’s lol Kleiner and Miller (just in alphabetical order you two)
Congrats again Higgy! Looking forward to your build.
Kurt
If everything seems under control, you’re just not going fast enough....
Build thread
MKIV complete kit # 9395 delivered 7/31/18
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Administrator
Woop woop!!!
Awesome Start Higgt. Send me a PM when you are ready to transform into HiggyMK4#9574
Also check out this thread on embedding pics instead of attaching thumbnails:
https://thefactoryfiveforum.com/show...tures-in-posts
Way to Go! Let the building begin!!!
FFR 5369 Pin Drive, IRS, Trigos, Torsen, Wilwoods, FMS BOSS 302 "B" cam , Mass-flo. CA SB100 (SPCN) Registered
Delivered 4/23/06. "Finished" 4/2012 (still not done!)
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Originally Posted by
David Hodgkins
Woop woop!!!
Awesome Start Higgt. Send me a PM when you are ready to transform into HiggyMK4#9574
Also check out this thread on embedding pics instead of attaching thumbnails:
https://thefactoryfiveforum.com/show...tures-in-posts
Way to Go! Let the building begin!!!
Will do Dave! I might be #9579 though lol, the writing has a New England accent on it and now I'm not sure. I'll call FF and confirm....
MK4 #11012 picked up 04/16/24
351W, 3 link, single roll bar
MK4 #10616 picked up 4/10/23
302w, 4 link, 17's, dual roll bar SOLD
MK4 #9759 picked up on 4/3/19
351C, 3 link, 17's, dual roll bars SOLD
-
Originally Posted by
HiggyMK4#????
Will do Dave! I might be #9579 though lol, the writing has a New England accent on it and now I'm not sure. I'll call FF and confirm....
Chassis number on your frame right beside steering wheel mount
-
Senior Member
Originally Posted by
Murd
Chassis number on your frame right beside steering wheel mount
Yes it does!! #9579!
MK4 #11012 picked up 04/16/24
351W, 3 link, single roll bar
MK4 #10616 picked up 4/10/23
302w, 4 link, 17's, dual roll bar SOLD
MK4 #9759 picked up on 4/3/19
351C, 3 link, 17's, dual roll bars SOLD