Quote Originally Posted by FF33rod View Post
I'm sure there's a post somewhere talking about this as but darned if I can find something. Feel free to point me to a thread.....

I've put together the front grill, radiator, fan assembly. I have the air conditioning condenser in the mix as well along with the Replica Parts fan shroud. These two extras push the fan further back and as you can see from the following picture, there will be interference with the bolts holding the top of the shocks to the suspension. What have others done to fix this? Notch the plastic fan piece? modify the grill mount to push the whole assembly further forward? I tried loosening the 4 grill mount screws but I can only make the problem worse.

Thanks for the help
Steve

IMG_2786a.jpg
Steve;
I put a thick washer behind the radiator support bracket where it mounts to the barrel bushing bolts at the chassis.
That moves the entire rad assy out a bit but you will have to deal with any body panels/hood etc. that end up a bit short.
Turning those top shock bolts around is very good advice for later on.
Dale