-
-
Independent Rear Suspension standard with high-end KONI 2812 double-adjustable shocks and sway bars front/rear
Our best-selling and best-performing independent rear suspension is standard on this Special Edition Factory Five Mk4 (Value: $2,499). We wanted the anniversary cars to out-handle anything on the road, so we’ve included KONI’s high-end double-adjustable aluminum body shocks, and front and rear sway bars. The shocks are manufactured in silver aluminum with a threaded body and custom coil-over kit (KONI’s value: $1,799, Sway bars value is $480).
Custom logo Wilwood performance brakes front and rear
The top shelf cross-drilled and slotted Wilwood performance brakes come custom powder-coated in black with silver Anniversary branding. These Wilwoods are huge 13″ brakes all around and come with a cool 6-piston front caliper and dual piston rear caliper with a separate emergency brake caliper. (Value: $3,130)
All-new Bronze 18″ Ten Spoke Sunburst Style Wheels
Our brand-new 18″ bronze wheels match our chassis closely, and resemble vintage 427 Cobra Sunburst style wheels, but provide modern handling and tire selection. These new rims are forged, 2-piece wheels with five large spokes and five smaller spokes. They come in 18″ x 9″ in the front and a massive 18″ x 11″ in the rear. (Value: $2,499)
Note: For those who prefer a more traditional Halibrand wheel on your Anniversary car, you can substitute any set of 15″, 17″, or 18″ Halibrands.
25th Anniversary Logo Gauges with GPS Speedometer
We developed this custom gauge set with our partners at Speedhut to incorporate individually serial numbered gauges with 25th Anniversary 1995-2020 graphic. These Vintage Gauges incorporate GPS Speedometer. (Value: $750)
Dave Lindsey
FFR's Mad Dog
-
Premium interior includes exclusive carbon fiber dash with glovebox, period-correct dash support down tubes, leather seats with custom stitching and logo, custom upholstered door panels, and 25th Anniversary steering wheel boss (Value: $1,433)
The high-end custom interior includes an all-new carbon fiber dash with glovebox (Value: $399).
The leather seats were custom made by our partners at Cobra Seats, and incorporate cross hatch stitching and subtle embroidered black thread Anniversary logo on the seat back. (Value: $749)
The interior is finished off with custom black door panels standard and period-correct dash support down tubes. (Value: $199 and $86)
Polished stainless steel and chrome bright work package
Each Anniversary car comes with a bright work package standard which includes polished stainless steel side exhaust, polished stainless steel bumpers front and rear (hoops and overriders), driver’s side chrome roll bar with chrome grommets, and assembled side louvers. (Value: $2,053)
High-end polished stainless steel side exhaust standard (Value: $899). Also standard are assembled side louvers (Value: $85). Car above and below is 20th Anniversary model.
Over-riders shown. 25th Anniversary Mk4 Roadsters comes with full front and rear hoops as well (not shown). (Value: $695)
Chrome roll bar standard (Value $299) with roll bar grommets (Value: $75)
Dave Lindsey
FFR's Mad Dog
-
Misc. Options
We want some consistency with these Anniversary cars, so we are including sun visors, wind wings (Value: $198), trunk gas strut kit (Value: $99), and body cut-outs (Value: $149).
Mk4 Roadster Body Revisions
We wanted the Anniversary cars to have the very best Mk4 body, so we built an all-new dedicated mold so that the parts would be brand-new and require less bodywork (Value: $1,800). We also made small changes to the Anniversary body. Here is a summary of the body changes:
License plate light raised for more space for the US standard size plate (not shown).
Rear taillight pad switched from dual round to singular rectangular on each side.
Front fenders enlarged slightly to allow for more tire clearance (not shown)
Rear fender side profile revised to move leading edge rearward and better visually center rear tire (not shown)
We are only making 25 of these cars and they are only available as complete kits. These 25 Year Anniversary cars represent a significant milestone in the history of Factory Five Racing, and I’m excited about the package that we’ve put together.
The price of these 25th Anniversary cars is $34,930 which includes a $3,500 discount for Factory Five customers. The Anniversary models are available to Factory Five customers on a first come, first served basis with $18,440 of special anniversary edition parts and options added to the Factory Five Mk4 Roadster complete kit.
25th Anniversary Specials Parts & Options List:
- Bronze Chassis ($1,200 value)
- Satin black powder-coated aluminum footbox panels ($400 value)
- Special Edition Anniversary GPS Gauges ($750 value)
- Full set of Special Edition Wilwood brakes ($3,130 value)
- Exclusive new bronze Sunburst Style 18″ wheels ($2,499 value)
- Special upholstered Anniversary leather seats with stitched logo ($749 value) and door panels (Value: $199)
- Special edition side badges and steering wheel center section ($100 value)
- Independent Rear Suspension standard with front and rear sway bars ($2,499 value and $480 value)
- KONI double-adjustable shocks standard ($1,799 value)
- Assembled side louvers ($85 value)
- Chrome roll bar ($299 value)
- Roll bar grommets ($75 value)
- Stainless steel side exhaust ($899 value)
- Stainless steel bumper set – front & rear hoops and overriders ($695 value)
- All-new carbon fiber dash with glovebox and center dash support tubes ($399 value and $86 value)
- Sun visors and wind wings ($198 value)
- Trunk gas strut kit ($99 value)
- All-new Mk4 Roadster body mold with rectangular 427 tail lights and body cut-outs ($1,800 value)
Total value of Special Edition Anniversary parts & options: $18,440!
Factory Five Mk4 Roadster Complete Kit: $19,990
Factory Five Owner Discount: $3,500
25th Anniversary Special Edition Mk4 Roadster Kit Price: $34,930.
Click here to order now!
Note: We are building the Anniversary car prototype at this moment, and prices and configurations listed above are as accurate as we can be, but may change.
Here’s a video on our 20th Anniversary car. We will show off our 25th Anniversary car at this year’s SEMA Show in November. We would like to get Anniversary kits to customers are soon as possible so that we may have some finished cars for our official 25th Anniversary which begins in January 2020.
TERMS & CONDITIONS:
Deposits are non-transferable.
Deposit of $2,500 and are subject to a 50% cancellation fee.
Production will start the last week of August.
Dave Lindsey
FFR's Mad Dog
-
Senior Member
A lot of really nice options on that. Not so sure the wife would be happy with me if I ordered one when I still have an unfinished kit in the garage.
Is that dash going to be available separately?
-
Senior Member
Pretty cool! I really like the rectangular tail lights. I hope that's something we can buy as an accessory to existing kits. Obviously, extra body work not included.
Started dreaming of a Cobra around 1987
Purchased Complete Kit 6/9/2017, Delivered 9/4/2017, Rolling Chassis 3/30/2018, Engine Dyno'ed 3/4/2022, Engine installed 8/27/2022, First start 6/13/2024, Go Kart 8/19/2024
Click here for my build thread
Serial #9158
Design Engineer at BluePrint Engines
-
Steve >> aka: GoDadGo
I'm just glad that they finally addressed the rear wheel arch centering and license plate issues.
These two items caused me to shorten the wheel base about 3/4" and go with a different license plate solution.
https://youtu.be/CaRlqMmKIzk
Hopefully the drivers door issue will be resolved as well.
I'm Happy To See That The Factory Five Team Is Taking Yet Another Bite At The Roadster Apple!
Last edited by GoDadGo; 08-09-2019 at 04:50 PM.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Nice package.
Curious as to others thoughts on the bronze colored wheels with the other bright work? Seems like when most guys have gone black wheels they also black out the chrome. I’m on the fence whether bronze and chrome would look good together and with what body color. Would love to see a mock up of this?
MK4 #8900 - complete kit - Coyote, TKO600, IRS - Delivered 6/28/16 First Start 10/6/16 Go cart - 10/16/16 Build completed - 4/26/17 - 302 days to build my 302 CI Coyote Cobra - Registered and street legal 5/17/17
Build Thread
http://thefactoryfiveforum.com/showt...e-build-thread
PHIL 4:13 INSTAGRAM - @scottsrides
-
Originally Posted by
Mad Dog
Premium interior includes exclusive carbon fiber dash with glovebox, period-correct dash support down tubes, leather seats with custom stitching and logo, custom upholstered door panels, and 25th Anniversary steering wheel boss (Value: $1,433)
The high-end custom interior includes an all-new carbon fiber dash with glovebox (Value: $399).
On this carbon fiber dash do I see it molds down in the center and is this just to contour to the dash support tubes?
-
Originally Posted by
J Bell
On this carbon fiber dash do I see it molds down in the center and is this just to contour to the dash support tubes?
In the video tha FRR put together to introduce the 25th anniversary edition, they discuss that molded section of the dash as simply a convenient place for mouting switches.
-
snazzy!!! I'm digging the gold powdercoating.
-
Senior Member
Got mine ordered. Excited to get started.